Di-Arco Hydra Power Press Brake
This small brake press is frequently used in the ASCO shop. It is commonly set up for bending small pieces, such as splices for coping or other flashing. Our layout team often uses this machine to produce mitered coping and other custom roofing accessories.
Model Number: |
14-48-2 |
---|---|
Standard Tolerance: |
1/32” |
Material Processing Capability
Material |
Thinnest |
Thickest |
---|---|---|
Aluminum (3003 H14) |
.025 |
.063 |
Galvanized Steel |
28 GA |
20 GA |
Stainless Steel |
28 GA |
20 GA |
Bending Capabilites (3003-H14 Aluminum)
Material Thickness |
Smallest Leg |
Largest Leg |
---|---|---|
.025-.040 |
1/4” |
6” |
.050-.063 |
3/16” |
6” |